Navigace

CASE STUDIES & REFERENCE

You can find our stations literally all over the world. We have many years of experience in supplying units to diverse climatic conditions, which are situated in the very remote places of our planet. We have implemented over 30 projects with a total output exceeding 150 MW.

important clients

ROSNEFT | GAZPROM | CUMMINS | DEBSWANA | GNPC | VTB

Case studies

PRODUCTION OF SPECIAL PREX INSULATION CONTAINER FOR CUMMINS C1000 D5
  • Customer – Cummins CZ
  • Implementation – 2016
  • Scope of supply – Production of special insulating container for C1000 D (833kW). Welded construction, sound and thermal insulation. Corrugated steel thermal insulation floor.
  • Complete central ventilation.
  • Roof openings for gas exhausts.
  • Custom door openings.
  • Fuel outlets
PRODUCTION, COMPREHENSIVE DELIVERY AND INSTALLATION OF THREE POWER STATIONS

Production, comprehensive delivery and installation of 3 electric stations – 2 C1100 D5 Cummins in special insulating container PREX and 1 C1400 D5 Cummins in special insulating container PREX (total output 2.6 MW)

  • Customer – Rosneft Russia
  • Implementation – 2018
  • Scope of delivery – Production of 3 PREX special containers adapted for extremely cold natural conditions (up to -50 °C)
  • Container frame welded by steel construction. Massive double-layered walls, inner side quilted with soundproofing material. The steel floor is made in the form of a bath and quilted with heat insulation material 100 mm thick.
  • Ventilation blinds are adapted to ventilate the interior of the container. The central door opening is located on the side of the container and further two wing gates on the end parts of the container were adapted to the client’s request.
  • The container contains a flanged pipe connection and complete wiring.
  • The rear part of the PREX power station (C1100 D5) contains a 6,000-liter backup tank.
  • The rear part of the PREX power station (C1400 D5) contains a 8,000-liter backup tank.
  • The tank is connected to the generator via a pipe. In this project, the steel structure of the tank was made in two layers.

THE TANK CONTAINS:

  • Fuel filter
  • Meter
  • Level meter
  • Pump (1.5-2.5 m3/h)
Production, Ccomprehensive delivery and service of 3 C1400 D5 Cummins power stations
  • Production, comprehensive delivery and service of 3 units C1400 D5 Cummins power stations in a special insulating container PREX including a room with a fully equipped workshop (with a total output of 3.4 MW) and automatic switching panels
  • Customer – GNPC Ghana
  • Implementation – 2017
  • Scope of delivery – Production of 3 PREX special containers adapted to extremely hot natural conditions (up to +45 °C)
  • Container frame welded by steel construction. Massive double-layered walls, inner side quilted with soundproofing material guarantees soundproofing up to 60 dBA/1m. The steel floor is made in the form of a bathtub and stitched with 100 mm thick insulation material.
  • The ventilation blinds are adapted to vent the interior of the container and an additional cooling system has also been installed. The central door opening is located on the side of the container and, further to our recommendation, two hinged gates on the end parts of the container have been adapted.
  • The container contains a flanged pipe connection and complete wiring.
  • The rear of the PREX power station (C1400 D5) includes a 5,000-liter backup tank and a fully-equipped workshop for up to 2 operators.
  • The tank is connected to the generator via a pipe.

THE TANK CONTAINS:

  • Fuel filter
  • Meter
  • Level meter
  • Pump (1.5-2.5 m3/h)

Including the power station, automatic switch panels have been supplied to ensure automatic switching from Standby to Prime mode, or to a complete shutdown and subsequent arming. The maximum switching time is 15 seconds.

Gallery

Contact specialist

Dmitrij Štěmenko

Dmitrij Štěmenko

Project Manager


CLOSE
CLOSE
Nahrávám